Happily, this is solved. If you are looking for where your input can be helpful, sort my new, and look for ones with few comments. And while you are looking at that list, upvote any that have fewer than 10 upvotes.
Mate that angle combined with customers using shitty hex tools or a multi tool led to SO MANY EXTRACTIONS from bolts with ruined heads. Not to mention how many frames ended up with a massive scratch from customers and staff not paying attention. I’ll never miss that shit.
Happily, this is solved. If you are looking for where your input can be helpful, sort my new, and look for ones with few comments. And while you are looking at that list, upvote any that have fewer than 10 upvotes.
[удалено]
Cannondale hides the bolt. It is a 4mm bolt under the top tube. Added difficulty because it is at a weird angle too.
Mate that angle combined with customers using shitty hex tools or a multi tool led to SO MANY EXTRACTIONS from bolts with ruined heads. Not to mention how many frames ended up with a massive scratch from customers and staff not paying attention. I’ll never miss that shit.
Look right where the top tube and seat tube meet inside the front triangle. There will be a little hex bolt in there.
2017 Cannondale SuperX
[удалено]
Stupid questions should always be upvoted so the next person can find it on google.
Is there a hidden bolt under the top tube where it meets the seat tube?
Nice bike, as far as I can judge it from this shot.
I'm pretty sure there is a hex bolt in the corner where the top tube and the seat tube meet.
Saddle is a Syncross XM 2.5 if that matters. Yes I'm new here
For future reference: Turning the bike over shows you a lot of stuff you didn't realize.
That is a carbon bike if I’m not mistaken just make sure you don’t over torque it
You want to adjust the saddle or seat post height?
Post height. Angle is good
If you don't have a torque wrench you should not mess with this.
Idk if it will work, have you tried to turn the seat clock or counter?
That's what I tried first and it made a horrific and expensive sounding grinding noise